Lebanon Auction Yard

Panels and Gates

Corral Panels and Gates

THESE PANELS & GATES ARE DAVIS GATE & WIRE BRAND. (FORMERLY FARMERS GATE)

We also carry a full line of Powder River Livestock Equipment

Call for current inventory.

Panels – Heavy Weight

8 ft. $146.45
10 ft. $160.01
12 ft. $187.13
14 ft. $195.26
16 ft. $219.67

Gates (only heavy weight)

4 ft. $109.84
6 ft. $116.62
8 ft. $146.45
10 ft. $160.01
12 ft. $187.13

14 ft. $195.26
16 ft. $219.67
18 ft. $256.28
20 ft. $286.12

Heavy Duty Feeder Panels (closed bottom)

4 ft. $185.77
6 ft. $215.60
8 ft. $248.15
10 ft. $290.18
12 ft. $363.41

16 ft. $451.55

Walk Thru Panels

Walk Thru Panels

Heavy Weight
4 ft. $ 192.55
6 ft. $ 221.03
BOW GATES
8 ft. $ 336.29
12 ft. (8+4) $ 394.60

• 93 inches in overall height
• Consists of 1.75″ O.D. round tubular steel
• Gate is 50″ in height with 6 horizontal bars
• Horizontal bars are placed through the brace before welding
• Braces are made by using flat steel, then punching holes through the steel, folding the edges, and adding two additional bends to provide stability, strength, and completion of the Z formation
• Provides convenient access into a corral system
• Entry latch is the V-Latch Pin System that provides quick & easy entry
• Hinges are welded in place
• The bow arch has two welded corner supports
• Drop-in pin system for quick & easy installation
• Both Arch and Gate have rounded corners
• Special connection feature on walk thru panel adds support and strength
• Corner brace is used in 6′, 8′ & 10′ units
• Available in lengths from 4′ to 16′ in 2′ intervals
• Available in galvanized and our Farmer’s Horse Design
• The panel has the same feature as other Farmer’s Panels

Round Bale Feeders

Closed Bottom Feeder

Closed bottom feeder $438.00

3 Piece “Easy Fit” Assembly

• 45 inches in overall height
• Consist of 1.75″ O.D. round tubular steel
• 3 piece easy fit assembly
• Three horizontal bars for extra strength
• Open feeder contains 18 upright supports in the bottom of the unit
• Close feeder contains 15 upright supports in the bottom of the unit
• Fifteen “S” Bars per unit
• 18.75″ Solid bottom on closed feeder reduces hay waste
• Eighteen feed openings
• End post consists of heavy duty angle iron for additional strength & stability
• Three pre-drilled holes with two fasteners
• Available in standard duty series and heavy duty series
• 8’6″ overall diameter

PRICES AS OF 9/1/2025. ALL PRICES ARE SUBJECT TO CHANGE.

Starting Jan. 1, 2020 there will be a .0057 tax added to all livestock equipment invoices.